Impulse Dynamics OPTIMIZER Smart Mini Instructions For Use Manual page 79

The Summary Report is saved in the Reports folder of the USB flash drive. The file name
of the Summary Report has the following format:
CompleteReport_NNNNNN_DDMMYYYYhhmmss
Where:
•
NNNNNN = serial number of device
•
DD = day the file was created
•
MM = month the file was created
•
YYYY = year the file was created
•
hh = hour the file was created
•
mm = minute the file was created
•
ss = second the file was created
3.22.2 Parameters Report
The Parameters Report is a printout of the current parameter settings programmed into
the OPTIMIZER Smart Mini IPG.
To create a Parameters Report:
1. If necessary, initiate a link with OPTIMIZER Smart Mini IPG
a. Place (or replace, if necessary) the Intelio Programming Wand over the
OPTIMIZER Smart Mini IPG implant site
b. Tap the Start OPTIlink button on the OPTIlink Session Pane
2. Tap the Preferences button on the Menu Bar
3. Select the Print/File tab
4. On the Print/File panel, tap the Parameters Report button
To save a PDF copy of the Parameters Report:
1. Insert a USB flash drive into the USB port on the left side of the Intelio
programmer tablet PC
2. Tap the PDF icon at the top right-hand corner of the Report Viewer window to
save a PDF file of the Parameters Report.
3. If successful, a pop-up window will appear indicating that the report was saved in
the USB drive. Tap Close to close the pop-up window.
The Parameters Report is saved in the Reports folder of the USB flash drive. The file
name of the Parameters Report has the following format:
ParametersReport_NNNNNN_DDMMYYYYhhmmss
Where:
•
NNNNNN = serial number of device
•
DD = day the file was created
•
MM = month the file was created
•
YYYY = year the file was created
•
hh = hour the file was created
•
mm = minute the file was created
•
ss = second the file was created
69