Impulse Dynamics OPTIMIZER Smart Mini Instructions For Use Manual page 105

Figure 91: Crosstalk Test Panel
7.1.10.2 Parameters Menu
The Parameters menu contains the following tabs, each displaying a panel with
parameters that can be set for the OPTIMIZER Smart IPG:
7.1.10.2.1 Overview
The Overview tab contains the most important parameters found under
the A/V, LS, and CCM Train & Schedule tabs.
Figure 92: Overview Panel
7.1.10.2.2 A/V
The A/V tab contains the following parameters:
•
Mode
•
Right Heat Sensing
Sensitivity
o
Polarity
o
•
Refractory
•
Tachycardia Rate
Note: Tachycardia rate applies to atrial rate only when device is
in ODO-LS-CCM mode
Note: Tachycardia rate applies to ventricular rate only when
device is in OVO-LS-CCM mode
•
CCM Inhibit
•
Short AV
•
Long AV
95