Installing Cylinder - BMW R 1100 S Repair Manual

1

Installing cylinder

•
Clean and de-grease cylinder base sealing face
(arrow) and apply 3-Bond 1209.
•
Oil the cylinder wall.
•
Compress the piston rings with a clamping strap,
BMW No. 11 2 900.
•
Install the cylinder and at the same time pass the
timing chain and the tensioner and guide rails
through the timing case cavity.
•
Tighten cylinder securing screws.
•
Fit new seals to pivot pins for chain guide rail (1).
•
Install chain sprocket.
X
Tightening torque/tightening sequence:
1. M 8 screw ................................................ 20 Nm
2. M 6 screw .................................................. 9 Nm
3. Pivot screw for chain guide rail.................... 18 Nm
11 2 900
u
RS110420
11.53