Installing Network Data Protection Unit Type A - Ricoh CL1000N User Manual

Ricoh cl1000n: user guide

Hide thumbs Also See for CL1000N:

Table of Contents

Installing Network Data Protection Unit Type A

❒ Protect the network data protec-

tion unit from physical shocks.

Turn off the power, and then un-

plug the power cable.

Insert the network data protec-

tion unit until it clicks into the

card slot on the controller board at

the back of the main unit.

❒ Do not touch the network data

protection unit while the ma-

chine is in use. It may come off

even if pushed only slightly.

Table of Contents