When Using Ipp With Smartdevicemonitor For Client - Ricoh CL1000N User Manual

When Using IPP with SmartDeviceMonitor for Client

When using IPP with SmartDeviceMonitor for
Client, note the following:
• The network printer can only receive one
print job from SmartDeviceMonitor for Client
at a time. While the network printer is print-
ing, another user cannot access it until the job
is finished. In this case, SmartDeviceMonitor
for Client tries to access the network printer
until the retry interval expires.
• If SmartDeviceMonitor for Client cannot ac-
cess the network printer and times out, it will
stop sending the print job. In this case, you
should cancel the paused status from the print
queue window. SmartDeviceMonitor for Cli-
ent will resume access to the network printer.
You can delete the print job from the print
queue window, but canceling a print job print-
ed by the network printer might cause the next
job sent from another user to be incorrectly
printed.
Operating Instructions
• If a print job sent from SmartDeviceMonitor
• Print jobs sent from another computer do not
• If various users send print jobs using Smart-
• An IP address cannot be used for the IPP port
Administrator Reference
for Client is interrupted and the network print-
er cancels the job because something went
wrong, send the print job again.
appear in the print queue window, regardless
of protocol.
DeviceMonitor for Client to network printers,
the printing order might not be the same as
that in which the jobs were sent.
name because the IP address is used for the
SmartDeviceMonitor for Client port name.
319