Ricoh CL1000N User Manual page 636

G G G G
Select the printer model(s) you want to use.
To change the printer name, change it in the [Change settings for 'Printer Name'] box.
H H H H
Double-click the printer name to display the printer settings.
Note
The details shown for [Comment:], [Driver:], and [Port:] vary depending on the operating system
being used, the model of printer selected, and the port being used.
I I I I
Click [Port:], and then select the port you want to use.
• SmartDeviceMonitor
• Standard TCP/IP Port
• LPR Port
SmartDeviceMonitor
A Click [Add Port...].
B Select [SmartDeviceMonitor], and then click [New Port...].
C Select a printer you want to use.
TCP/IP
A
Click [TCP/IP], and then click [Search].
Available printers will be listed.
B
Click the printer you want to use, and then click [OK].
Note
Printers that respond to an IP broadcast from the computer will be displayed. To print to a
printer not listed here, click [Specify Address], and then type the IP address or host name.
You cannot add an address partially similar to that already used. For example, when
"192.168.0.2" is already used, "192.168.0.2xx" cannot be used. Similarly, when
"192.168.0.20" is already used, "192.168.0.2" cannot be used.
Operating Instructions Client Reference
70