Ricoh CL1000N User Manual page 323

D In the [Remote Printer No.] box, type the printer number.
Important
Use the same printer number as that to be created in the printer server.
E Click [OK] to close the property sheet.
F After a confirmation dialog box appears, click [OK].
G G G G
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
H H H H
Type "PCONSOLE" from the command prompt.
F:> PCONSOLE
I I I I
Create a print queue as follows:
Note
If you use a currently defined print queue, go to step
A From the [Available Options] menu, select [Print Queue Information], and then press Enter key.
B Press Insert key, and then type a print queue name.
C Press ESC key to return to the [Available Options] menu.
J J J J
Create a printer as follows:
A From the [Available Options] menu, select [Print Server Information], and then press Enter key.
B To create a new print server, press Insert, and then type a print server name.
If you use a currently defined print server, select one of the print servers shown in the [Print Server]
list.
Important
Use the same name as that specified in the NIB Setup Tool. (Step
Operating Instructions Administrator Reference
J
.
F - A).
98