Configuring Netbeui For Printing - Ricoh CL1000N User Manual

Configuring NetBEUI for Printing

Follow these instructions to configure the network interface board and Windows NT 4.0 to use the Net-
BEUI protocol.
Preparation
To use NetBEUI, use the SmartDeviceMonitor for Client port.
Configuring the printer
Configure the printer to use the NetBEUI protocol.
• Enable SMB to print using NetBEUI (The default is active).
Reference
For more information about how to make the above settings, see "Windows NT 4.0 Configuration",
Client Reference that comes with this printer.
Operating Instructions Administrator Reference
70