Configuring The Network Interface Board - Ricoh CL1000N User Manual

Configuring the Network Interface Board

The network interface board settings can be displayed by using the commands below.
• telnet : Use the "show" command. See
mation" .
Item name
Common
Mode
Protocol Up/Down
AppleTalk
TCP/IP
NetWare
SMB
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location
Contact
Soft switch
Operating Instructions
p.246 "Network interface board configuration settings infor-
Meaning
Up means active, Down means inactive.
Internal version number
Internal version number
Printer name.
Comment.
Location of the printer in the SNMP and Rendezvous information
Person who maintains the printer and contact information in the
SNMP information
Administrator Reference
286