Ricoh CL1000N User Manual page 111

Troubleshooting
Messages/Second messages
Replace PCU
Replace PCU
soon
Reset Charge
Roller Correctly
Reset Fusing
Unit Correctly
Reset PCU
5
Correctly
Reset Transfer
Unit Correctly
Reset Tray #
or Form Feed
SC XXX-X
Power Off On
If Error Reoccur
Call Service
SD authenticatn.
failed
Setting error
Reset the job
Supply order
failed
Toner is Almost
Empty: Black
56
Description
It is time to replace the PCU
(Photo Conductor Unit).
The time to replace the photo
conductor unit is soon.
The charge roller is not set or
is not set correctly.
The fusing unit is not set cor-
rectly or is not set.
The PCU is not set correctly or
is not set.
The transfer unit is not set cor-
rectly or is not set.
The indicated paper input
tray is not set correctly.
The Service Code or SC
number indicates the problem.
Authentication for the SD
card has failed.
A setting error has occurred.
Supply order has failed.
The black toner is almost empty. Prepare a new black toner car-
Solution
Prepare the new PCU. Al-
though printing is possible
even if this message is dis-
played, in order to secure a
stable quality, replace as soon
as possible.
See p.38 "Replacing Photo
Conductor Unit Type 140".
Prepare the new PCU.
Contact your sales or service
representative.
Contact your sales or service
representative.
Check the PCU.
Contact your sales or service
representative.
Reset the tray or press { { { { Form
Feed} } } } key to print out.
Turn the power switch off and
on. If the message appears
again, contact your sales or
service representative.
Turn the power switch off and
then back on again. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
Contact your sales or service
representative.
The use is required to reset the
job.
tridge.
For details about the number
of pages that can be printed
after the message appears, see
p.75 "Toner cartridge".