Ricoh CL1000N User Manual page 285

Standard TCP/IP Port
A Click [Create a new port:].
B Select [Standard TCP/IP] in [Create a new Port], and then click [Next].
C Click [Next] in the "Add Standard TCP/IP Printer Port Wizard" window.
D Type the printer name or IP address in the "Printer Name or IP Address" box, and then
click [Next>].
E Click [Finish] in the "Add Standard TCP/IP Printer Port Wizard" window.
LPR Port
A Click [Create a new port:].
B Select [LPR Port] in [Create a new Port], and then click [Next].
C Type the printer's IP address in the "Name or address of server providing lpd" box.
D Type "lp" in the "Name of printer or print queue on that server" box, and then click [OK].
G G G G
Confirm to select the name of the printer whose driver you want to install, and then click [Next >].
H H H H
Change the name of the printer if you want, and then click [Next >].
Configure the default printer as necessary. Check [Yes] to set the printer as the default printer.
I I I I
Check [Share as:], and then click [Next >].
To change the printer name, change it in the [Share as:] box.
Note
Check [Shared] to start installation of an alternative driver ([Windows NT 4.0/2000], [Windows 95/98])
has already been selected.
You can add an alternative driver after installation. See
Operating Instructions Administrator Reference
p.66 "Setting the Printer
60
Shared".