Ricoh CL1000N User Manual page 280

LPR Port
A Click [Add].
B Select [LPR Port], and then click [OK].
C Type the printer's IP address in the "Name or address of server providing lpd" box.
D Type "lp" in the "Name of printer or print queue on that server" box, and then click [OK].
J J J J
Make sure the location for the selected printer is shown after [Port:].
K K K K
Double-click [Shared] to display the shared settings.
L L L L
To share the printer, check the left side of the [Shared] box.
M M M M
Click the box under [Shared name] to install the alternative driver for the necessary system.
Note
Check [Shared] to start installation of an alternative driver ([Windows NT 4.0/2000], [Windows 95/98])
has already been selected.
You can add an alternative driver after installation. See
N N N N
Configure the default printer as necessary.
Default Printer
Check [Default Printer] to set the printer as the default printer.
O O O O
Click [Continue] to start printer driver installation.
Note
During installation, the [Hardware Installation] dialog box may appear. In this case, click [Continue
Anyway] to continue the installation.
Operating Instructions Administrator Reference
p.66 "Setting the Printer
55
Shared".