Ricoh CL1000N User Manual page 333

F F F F
Click the [NetWare] tab, and make the following settings.
A In the [Logon Mode] area, select [File Server Mode] or [NDS Mode].
Note
If [File Server Mode] is selected, a connecting destination will be chosen based on the string
entered in step C.
If [NDS Mode] is selected, a connecting destination will be chosen based on the string entered
in step D.
B In the [Print Server Name(P):] box, enter the name of the print server.
Important
Use the same name as that of the print server name to be set from NWadmin (
Limitation
Enter up to 47 alphanumeric characters.
C In the [File Server Name(F):] box, enter the name of the file server in which a print server is
to be created.
By clicking [Browse(B)...], you can select a file server among those listed in the [Browse(B)...]
dialog box.
Limitation
Enter up to 47 alphanumeric characters.
D In the [NDS Tree(T):] box, enter the NDS tree name in which to make the file server.
By clicking [Browse(B)...], you can select the NDS tree name and NDS context name from their
lists.
Limitation
Enter up to 32 alphanumeric characters ("-" and "_" can be used).
Operating Instructions Administrator Reference
L
108
-C).