Ricoh CL1000N User Manual page 602

C
As necessary, type the names to distinguish the printer in [IPP Port Name]. Type a different
name from those of any existing port name.
If you omit this, the address typed in [Printer URL] will be set as the IPP port name.
D
If a proxy server and IPP user name are used, click [Detailed Settings], and then configure
the necessary settings.
Note
For more information about these settings, see SmartDeviceMonitor for Client Help.
E
Click [OK].
J J J J
Make sure the location for the selected printer is shown after [Port:].
K K K K
Configure the User Code and default printer as necessary.
User Code
The procedure to specify the "User Code" may differ depending on the printer language.
• RPCS
You can specify the "User Code" when installing the printer driver. You cannot register or
edit the "User Code" from the Printer Driver dialog box. To change the "User Code", you
must uninstall the printer driver, and then register the new "User Code" during the re-install
process.
• PCL 5c
You can specify the "User Code" with the Printer Driver Properties after installing the printer
driver. See printer driver's Help.
Default Printer
Check [Default Printer] to set the printer as the default printer.
L L L L
Click [Continue] to start printer driver installation.
Operating Instructions Client Reference
36