Changing Port Settings - Ricoh CL1000N User Manual

Changing Port Settings

Follow the steps to change SmartDeviceMonitor for Client settings, such as the proxy server settings
or IPP URL.
Note
There are no settings for the NetBEUI protocol.
A A A A
From the [Printers] window, click the icon of the printer you want to use. On the [File] menu,
click [Properties].
B B B B
Click the [Ports] tab, and then click [Configure Port].
The [Port Settings] dialog box appears.
• For TCP/IP protocol, you can configure Timeout Settings.
Note
If you cannot set items on the [Recovery/Parallel Printing] tab, follow the procedure below.
A
Click [Cancel] to close the [Port Configuration:] dialog box.
B
Start SmartDeviceMonitor for Client, and then right-click the SmartDeviceMonitor for Cli-
ent icon on the taskbar.
C
Click [Extended Features Settings], and then select the [Set Recovery/Parallel Printing for each
port] check box.
D
Click [OK] to close the [Extended Features Settings] dialog box.
• For IPP, you can configure User Settings, Proxy Settings and Timeout Settings.
Note
For more information about these settings, see SmartDeviceMonitor for Client Help.
Operating Instructions Administrator Reference
42