UNIX Configuration
Executing the Installation Shell Script
After having configured the printer IP address, follow the procedure below to
execute the installation shell script and setup the workstation printing environ-
1
ment.
Preparation
Before executing the installation shell script, the IP address, the host name
and the printer name are required.
The following procedures use sample IP address: 192.168.15.16, sample host
name: nphost and sample printer name: np.
Note
❒ Use ftp to get the installation shell script from the printer.
A A A A
Log on to the workstation as root.
Note
❒ If you do not log on as root, the installation shell script will not run.
B B B B
Get the installation shell script from the printer.
A Move to the directory you want to copy the installation shell script to.
B Use ftp to connect to the printer with the IP address that you just config-
ured.
# ftp 192.168.15.16
Connected to 192.168.15.16
220 printer FTP server ready.
name (192.168.15.16:root:)
C When a user name is requested, leave blank and press the { { { { RETURN} } } } key.
331 Password required for root.
On:
D When a password is requested, leave blank and press the { { { { RETURN} } } } key.
230 User root logged in.
ftp>
E Type the following to get the installation shell script.
ftp> get install
F Close the ftp session.
ftp> bye
221 Goodbye.
#
6