Ricoh CL1000N User Manual page 497

Setting Order of Priority for Each Protocol
You can specify the order of priority for "diprint", "1pr", and "ipp". Smaller numbers indicate higher
priority.
• diprint
msh> rendezvous diprint [0–99]
• lpr
msh> rendezvous lpr [0–99]
• ipp
msh> rendezvous ipp [0–99]
IP TTL setting
You can specify the IP TTL (the number of routers a packet can pass through).
msh> rendezvous ipttl {1-255}
Note
The factory default setting is 255.
Resetting the computer name and location information
You can reset the computer name and location information.
msh> rendezvous clear {cname | location}
• cname
Reset the computer name. The default for the computer name will be displayed when the com-
puter is restarted.
• location
Reset the location information. The location information will be deleted.
Operating Instructions Administrator Reference
272