Adjusting The Tray Registration - Ricoh CL1000N User Manual

Adjusting the Tray Registration

The printing position needs adjust-
ment when the optional paper feed
unit or duplex unit is attached.
Normally, adjustment is not required.
Adjust only when the printing area
has shifted out of alignment.
A A A A
Press the { { { { Menu} } } } key.
On Line Menu
Job Reset Escape
Form Feed
"Menu" appears on the panel dis-
play.
B B B B
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Maintenance", and then
press the { { { { # Enter} } } } key.
Menu:
Maintenance
C C C C
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Registration", and then
press the { { { { # Enter} } } } key.
Maintenance:
Registration
D D D D
Confirm that "Prt. Test Sheet" is
displayed, and then press the { { { { # En-
ter} } } } key.
Registration
Prt. Test Sheet
Enter
AAL002S
Adjusting the Tray Registration
E E E E
Confirm that "Tray 2" is displayed,
and then press the { { { { # Enter} } } } key.
Prt. Test Sheet
Tray 2
The test sheet prints out.
F F F F
Check the test sheet and adjust to
make the blank portions of the
printout equal.
A Press the { { { { Escape} } } } key.
B Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Adjustment", and then
press the { { { { # Enter} } } } key.
Registration:
Adjustment
C Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play the parameter to be adjust-
ed, and then press the { { { { # Enter} } } }
key.
Adjustment
Horiz.:Dup.Back
4
49