Ricoh CL1000N User Manual page 498

Bluetooth™
To make setting for Bluetooth™, use the "btconfig" command.
View settings
The Bluetooth™ settings are displayed.
msh> btconfig
Mode settings
You can set Bluetooth™ operation mode to either [private] or [public].
msh> btconfig [private | public]
Note
The default is [public].
- Terminology -
- -
Terms used in the explanations are explained.
Important
If a protocol is disabled or inactive, functions provided by that protocol cannot be used.
TCP/IP
All functions that use "ftp", "lpr", "rsh"/"rcp", "diprint", http, ipp, web, wins, snmp
*1 *2
rendezvous.
*1
SNMP using TCP/IP
*2
SMB using TCP/IP
Note
You cannot switch protocol functions, but you can disable smtp and dns by switching off or dis-
abling TCP/IP.
Operating Instructions Administrator Reference
*1
, smb
273
*2
, and