Ricoh CL1000N User Manual page 48

Enabling SSL
After installing the server certificate in the printer, enable the SSL setting so that
the user can certify the printer.
This procedure is used for a self-signed certificate or a certificate issued by a cer-
tificate authority.
Using Web Image Monitor in Administrator mode, make the settings.
A A A A
Open a Web browser.
B B B B
Enter "http://(machine's-address)/" in the address bar to access the printer.
C C C C
Select Administrator mode.
Reference
For details about selecting Administrator mode in Web Image Monitor, see
"Access in Administrator Mode", Administrator Reference.
D D D D
Click [Configuration], click [Security], and then click [SSL/TLS].
The [SSL/TLS Settings] page appears.
E E E E
Click [Enable] for [SSL/TLS].
F F F F
Click [Apply].
The SSL setting is enabled.
Note
❒ When using SSL, enter "http://(machine's-address)/" to access the printer.
For this to work, Internet Explorer 5.5 or later, or Netscape 7.0 or later must
be installed on your computer.
5