Ricoh CL1000N User Manual page 76

Adhesive labels
Printer setup
Printer driver setup
Enabled paper feeding tray Tray 1
Number of sheets that can
be set
Two-sided printing
Additional cautions
OHP transparencies
Printer setup
Printer driver setup
Enabled paper feeding tray Tray 1
Number of sheets that can
be set
Two-sided printing
Additional cautions
Press [Paper Input] menu, [Paper Type], and then [Labels] on the con-
trol panel.
Click [Labels] in the [Paper Type] list.
80
Note
❒ Make sure paper is not stacked higher than the LABEL upper
limit mark (T) inside the tray.
Not possible
Print speed is slightly slower compared to plain paper.
Press [Paper Input] menu, [Paper Type], and then [Transparency] on
the control panel.
Click [OHP Transparency] in the [Paper Type]list.
50
Note
❒ Make sure paper is not stacked higher than the TRANSPAR-
ENCY upper limit mark (T) inside the tray.
Not possible
• Print speed for OHP transparencies is slower than for plain paper.
• Due to switching modes, the machine will be on standby for
thirty or forty seconds after the job was received.
Paper Recommendations
2
21