Ricoh CL1000N User Manual page 487

Operating Instructions Administrator Reference
262
Configuration
Use the set command to make WINS active or inactive.
msh> wins interface_name {on | off}
• "on" means active and "off" means inactive.
Address configuration
Use this command to configure a WINS server IP address.
msh> wins ifname {primary|secondary} IP address
• Use the "primary" to configure a primary WINS server IP address.
• Use the "secondary" to configure a secondary WINS server IP address.
• You cannot use "255.255.255.255" as the IP address.
NBT (NetBIOS over TCP/IP) Scope ID Selection
You can specify the NBT scope ID.
msh> wins interface_name scope scope ID
• The scope ID is specified using up to 31 alphanumeric characters.