Ricoh CL1000N User Manual page 33

Options
B Press the { { { { # Enter} } } } key.
The following message appears
on the panel display.
1
SSID:
Note
❒ The value in brackets at the
upper right is the number of
characters entered.
C Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to se-
lect characters, and then press
the { { { { # Enter} } } } key.
SSID:
A
You can now enter the next
character.
SSID:
A
D Continue entering the key.
Note
❒ The characters that can be
used are ASCII 0x20-0x7e (32
bytes).
❒ To display the previous char-
acter, press the { { { { Escape} } } } key.
E After entering the key, press
the { { { { # Enter} } } } key twice.
SSID:
AAAAAAAAAAAAAAAA
The screen returns to step
26
L L L L
In the case of using a WEP key on
a network, activate the WEP set-
ting to be used for communica-
tion along with WEP.
Note
❒ Confirm the network adminis-
trator for the WEP Key to use.
❒ WEP key can also be set using a
web browser. For details, see
Web Image Monitor Help.
A Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "WEP Setting".
IEEE 802.11b:
WEP Setting
B Press the { { { { # Enter} } } } key.
WEP Setting:
*Not Active
C Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Active", and then press
the { { { { # Enter} } } } key.
WEP Setting:
Active
The following message appears
on the panel display.
Change WEP Key:
Yes (HEX)
Note
❒ When setting the WEP Set-
ting to "Active", you will
need to enter the WEP key. If
K
-A.
you have not entered the key,
be sure to enter it.
❒ If you have entered the WEP
key and change the setting,
press the { { { { U U U U } } } } or { { { { T T T T } } } } key to
display "No", and then press
the { { { { # Enter} } } } key.