Ricoh CL1000N User Manual page 17

Options
B Push in the front ends of the side
covers.
1
C The left side cover is attached
using the same procedure de-
scribed in steps A A A A and B B B B .
Note
❒ When moving the printer, re-
move the paper feed unit.
❒ After finishing installation, you
can check whether the paper
feed unit is installed properly.
Print the configuration page
from the "List/Test Print"
menu. If it is installed properly,
you will see "Optional Paper
Tray 2" under the "Options"
list.
❒ If the paper feed unit is not
installed properly, reinstall it
from step
stall it properly even after at-
t e m p t in g r e i n s t a l l at i o n ,
contact your sales or service
representative.
10
AAL114S
B
. If you cannot in-
Reference
For printing the configura-
tion page, see "Printing a
Configuration Page", Admin-
istrator Reference.
See "Loading Paper", Main-
tenance Guide.
Important
❒ Before use, adjust the print-
ing position. For details, see
"Adjusting the Tray Regis-
tration", Maintenance Guide.
❒ Before using the new paper
feed unit, you must make set-
tings in the printer driver.