Ricoh CL1000N User Manual page 591

M M M M
Make sure the location for the selected printer is shown after [Port:].
N N N N
Configure the User Code and default printer as necessary.
User Code
The procedure to specify the "User Code" may differ depending on the printer language.
• RPCS
You can specify the "User Code" when installing the printer driver. You cannot register or
edit the "User Code" from the Printer Driver dialog box. To change the "User Code", you
must uninstall the printer driver, and then register the new "User Code" during the re-install
process.
• PCL 5c
You can specify the "User Code" with the Printer Driver Properties after installing the printer
driver. See printer driver's Help.
Default Printer
Check [Default Printer] to set the printer as the default printer.
O O O O
Click [Continue] to start printer driver installation.
P P P P
When the [Select Program] dialog box appears, click [Finish].
Q Q Q Q
When the installation completion dialog box appears, click [Finish].
R R R R
Set up the options.
Note
You must set up the options when the bidirectional transmission is disabled. For more informa-
tion about the status of the bidirectional transmission, see
Reference
For more information about option settings, see
Operating Instructions
p.55 "Bidirectional
p.54 "Setting Up
Client Reference
transmission".
Options".
25