Unix Configuration; Before Setup; Using The Lp/Lpr Commands; Using The Rsh/Rcp/Ftp Commands - Ricoh CL1000N User Manual

This section explains how to setup a network printer and check the print status
using UNIX.
Limitation
❒ To print from a UNIX workstation, use the file that the printer supports.

Before Setup

Setting up can vary depending on the printing commands. Make sure to make
the settings accordingly.

Using the lp/lpr commands

A A A A
Use the installation shell script to register the device option, as well as the
printer host name and the IP address.
⇒ p.4 "Using the Installation Shell Script"
B B B B
Start printing.
⇒ p.14 "Printing Method"

Using the rsh/rcp/ftp commands

A A A A
Edit the host file to register the printer host name and the IP address.
B B B B
Start printing.
⇒ p.14 "Printing Method"
Reference
See p.9 "After Executing Installation Shell Script" for host file editing.
Note
❒ If you cannot edit the host file, use the install shell script to register the host
name.

1. UNIX Configuration

3