Ricoh CL1000N User Manual page 482

Parameter
key [key value] val [1|2|3|4]
keyphrase [phrase] val [1|2|3|4]
encval [1|2|3|4]
Operating Instructions
Value to be configured
You can specify the WEP key when entering in hexa-
decimal.
With a 64-bit WEP, you can use 10 digit hexadecimal.
With a 128-bit WEP, you can use 26 digit hexadecimal.
Up to four WEP keys can be registered. Specify the
number to be registered with "val".
When a WEP is specified with the key, the WEP speci-
fied with the keyphrase is overwritten.
To use this function, set the same key number and WEP
key for all ports that transmit to each other.
You can omit the numbers with "val". The key number
is set to 1 when making these omissions.
You can specify the WEP key when entering in ASCII.
With a 64-bit WEP, you can use 10 digit hexadecimal.
With a 128-bit WEP, you can use 26 digit hexadecimal.
Up to four WEP can be registered. Specify the number
to be registered with "val".
When a WEP is specified with the keyphrase, the WEP
specified with the key is overwritten.
To use this function, set the same key number and WEP
key for all ports that transmit to each other.
You can omit the numbers with "val". The key number
is set to 1 when making these omissions.
You can specify which of the four WEP keys is used for
packet encoding. "1" is set if a number is not specified.
Administrator Reference
257