DNS
Use the "dns" command to configure or display DNS (Domain Name System) settings.
View setting
The following command displays current DNS settings:
msh> dns
DNS server configuration
The following command enables/disables use of the DNS server address:
msh> dns number server server address
The following is a sample configuration using an IP address of 192.168.15.16 on DNS 1 server:
msh> dns 1 server 192.168.15.16
• You can register up to three DNS server numbers.
• You cannot use "255.255.255.255" as the DNS server address.
Dynamic DNS Function Setting
You can set the dynamic DNS function to active or inactive.
msh> dns ifname ddns {on|off}
• "on" means active and "off" means inactive.
Interface name
ether
*1
wlan
*1
Available when the optional 802.11b interface unit is installed.
Operating Instructions
Interface to be configured
Ethernet interface
IEEE 802.11b interface
Administrator Reference
266