Ricoh CL1000N User Manual page 524

Message
SMTPC: no smtp server. connection close.
SMTPC: failed to connect smtp server.
SMTPC: username or password wasn't correct.
Snmp over ip is ready.
Snmp over ipx is ready.
snmpd start.
started.
Started.
Operating Instructions
Description and Solutions
No response from the SMTP protocol. Cannot connect to
the SMTP server. This could be because:
• Another server other than the SMTP server has been
specified.
• The SMTP server port number is incorrect.
Failed to connect the SMTP server. This could be because:
• There is no connection to the network.
• The network configuration is incorrect, so there is no
response from the SMTP server.
• The SMTP server name is incorrect.
• The specified SMTP server is incorrect.
• There is no specified SMTP server IP address in the
DNS server.
• Another server other than the SMTP server has been
specified.
• The SMTP server port number is incorrect.
Failed to connect the SMTP server. This could be because:
• The specified SMTP user name is incorrect.
• The specified SMTP password is incorrect.
Check the SMTP user name and password.
Communication over TCP/IP with SNMP is available.
Communication over IPX with SNMP is available.
SNMP service has started.
Direct print service has started.
The Rendezvous function is enabled.
Administrator Reference
299