Adjusting Tray Registration - Ricoh SP6330 Hardware Manual

Adjusting Tray Registration

You can adjust the registration of each tray. The vertical adjustment is used for all trays. Normally, you
need not update the registration. But when the optional paper feed unit or the duplex unit is installed,
updating is useful in some cases.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Maintenance], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Quality Maintenance], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Registration], and then press the [OK] key.
BVP006
Adjusting Tray Registration
163
8