Adjusting Tray Registration - Ricoh Aficio CL7000 Operating Instructions Manual

Adjusting Tray Registration

You can adjust the registration of
each tray. The vertical adjustment is
used for all trays. Normally, you need
not update the registration. But when
the optional paper feed unit or the
duplex unit is installed, updating is
useful in some cases. The following
procedure describes how to adjust
tray 3. The same procedure applies to
other trays as well.
A A A A
Press the { { { { Menu} } } } key.
"Menu" appears on the display.
B B B B
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Maintenance", and then
press the { { { { # Enter} } } } key.
Menu:
Maintenance
C C C C
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Registration", and then
press the { { { { # Enter} } } } key.
Maintenance:
Registration
D D D D
Print the test sheet to preview the
settings.
A Confirm "Prt. Test Sheet" ap-
pears, and then press the { { { { # En-
ter} } } } key.
Registration:
Prt. Test Sheet
B Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to se-
lect the tray to adjust, and then
press the { { { { # Enter} } } } key.
Prt. Test Sheet:
Tray 3
E E E E
Confirm the position of the image
on the test sheet, and then adjust
the registration value.
ACE082S
The following are examples for ad-
justing the margin on the test
sheet:
A Press the { { { { Escape} } } } key.
Adjusting Tray Registration
2
43