Report Parameters - Printronix T5000 Software Manual

Chapter 7
Data Validation

Report Parameters

To export the telemetry data to an ASCII file, select a printer or group of
printers, and then select either of the Reports options. The AutoID Data
Report Parameters dialog box opens. See Figure 231.
Data Field
Choices
Exclusions
File Type
File Name
Figure 231. The AutoID Data Report Parameters Dialog Box
Select the data fields you wish to include in the report (one at a time) and
click ->.
NOTE: You can select multiple data fields by using the Ctrl or Shift key.
If [Barcode] precedes the data field name, then it is exclusively for bar codes.
If [RFID] precedes the data field name, then it is exclusively for RFID tags.
If neither precedes the data field name, then it is a label field used for both bar
codes and RFID tags.
You can later remove a data field from the report by selecting it and
clicking <-. If you want to move all of them at once, click >> or <<. See "Data
Fields" on page 268.
To exclude bar codes, RFID tags, labels, passed items, or failed items from
the report, check the corresponding check box.
Using the Type down arrow, select a report type: comma separated variable
or XML. See "Comma Separated Variable Report" on page 275 and "XML
Report" on page 275.
Name the report using the Output File field. The default location is the
program installation directory. Click Browse to save the file in a different
location.
Once your report is set up, click Ok to save the report parameters.
264
Data
Fields
Chosen
Move
Selected
Item
Move All
Items