Autoid Data Manager; Odv Quality Wizard - Printronix T5000 Software Manual

Chapter 3

AutoID Data Manager

AutoID Data Manager
See "AutoID Data Manager" on page 259.

ODV Quality Wizard

NOTE: You must set the following in the VALIDATOR menu to use the ODV
The ODV Quality Wizard is a function that helps you select the best
combination of print speed and print intensity that will produce optimal bar
code output. It displays controls that allow you to select a print speed and a
print intensity.
Click the Test Print button to print and validate a test bar code pattern. Based
on the validation results, the ODV Quality Wizard provides setting
suggestions to optimize the bar code quality.
IMPORTANT
Do not follow any suggestions if "Barcode Code 39 Status" does not
display "Pass."
Click OK to save these changes in Configuration 1. Configuration 1 then
becomes the Power-Up configuration (see page 69). Click Cancel to not save
the changes.
IMPORTANT
Clicking the
same as clicking OK.
NOTE: The ODV Quality Wizard is printer specific, and not all printer models
112
Figure 92. ODV Quality Wizard Window
(online data validator) Quality Wizard:
• Set Telemetry Path to Network Port.
• Set Telemetry Data to Full Report or Validation Mode.
Close button in the upper-right corner functions the
have ODV Quality Wizard support. Printers without ODV Quality
Wizard support display the error message:
Operation not allowed on this type of printer.