Printronix T5000 Software Manual page 273

Bar Code Data Fields
These are the available bar code data fields:
Decoded Data
Deviation
Symbology
Letter Grade
Ref Decode
Decodeability Avg
Modulation Avg
Defects Avg
Edge Contrast Avg
Rmin/Rmax Avg
Symbol Contrast Avg
PCS Avg
R(White) Avg
R(Black) Avg
Ratio Avg
Bar Deviation Avg
Minimum Bar Dev Avg
Maximum Bar Dev Avg
Quiet Zone
Percent Decode Average
Absolute X Dimension
Overall Symbol Grade Avg
Direction
Checksum
Self Check
Symbology and Addendum
For an introductory description of the bar code data fields, see the Layman's
Guide to ANSI X3.182.
For a complete description, see the ANSI INCITS 182-1990 (R2002)
Guideline for Bar Code Print Quality available from the American National
Standards Institute at http://www.ansi.org/.
Viewing Telemetry Data
Horizontal Position
Vertical Position
Good Scans on Code
Total Scans on Code
Good Quiet Zones
Lead QZ In X's
Trail QZ In X's
Sync State
X Units Times 10
Percent Good Global Thresholds
PDF 417 Gap Failure
Decodeability Failure
Defects Failure
Percent Decode Failure
Quiet Zone Failure
Symbol Contrast Failure
Encodation Failure
Checksum Failure
Calibration Warning
Overall Grade Failure
Internal Data Format Error
Modulation Failure
Minimum Reflectance Failure
Minimum Edge Contrast
Disregard Quiet Zone Failures
Disregard Contrast Failures
273