Printronix T5000 Software Manual page 268

Chapter 7
Data Validation
Data Fields
NOTE: For the correct syntax for using the data field names in databases,
Over 70 data fields are available that describe bar code or RFID tag telemetry
data. The first nine are defined as follows:
1. Format
This defines the type of record using an integer value.
Value
Label
Extended Label
Barcode Short
Barcode Validation
Barcode Long
RFID Version 1
RFID Version 2
2. Identifier
This identifies the RFID tag, bar code, and label number. See "Identifier" on
page 265.
3. CaptureDate
This indicates the date and time the record was captured, using local time, in
the format: Day, Month, Date, Time (00:00:00), Time Zone, and Year.
See Figure 237.
If the data is being sent to an external database, it is represented by a fixed
format string defined as
MM-dd-yyyy_HH:mm:SS where:
MM
dd
yyyy is the year
HH
mm
SS
4. Printer Name
This indicates the printer name as it appears in the Printer List window (see
Figure 226 on page 260).
5. Printer Address
This is the IP address of the printer.
268
see "Data Field Names" on page 285.
Description
label status, older firmware
(no longer supported)
label status, newer firmware
bar code data, short format
bar code data, validation format
bar code data, long format
RFID version 1 tag
RFID version 2 tag
Figure 237. CaptureDate Field Format
is the month of the year (01-12)
is the day of the month (01-31)
is the hour of the day (00-23)
is the minutes of the hour
is the seconds of the minute