Enable Remote Printer Management - Printronix T5000 Software Manual

Configure Macro

Enable Remote Printer Management

This sets the printer's diagnostic port to Ethernet, without having to navigate
through the printer's operator panel.
It performs the following in the background:
1. Opens a command prompt session.
2. Executes a telnet command to the printer's IP address.
3. Logs in as root.
4. Executes the enable printermgr telnet command.
5. Closes the command prompt session.
NOTE: You must have Telnet root privileges to use this utility. See "Telnet
Root Password" on page 60.
Select Utilities Enable Remote Printer Management, and the following
dialog box opens:
Figure 121. Enable Remote Printer Management Dialog Box
Click Yes to continue.
When remote printer management has been enabled, the following dialog box
opens:
Figure 122. Remote Printer Management Enabled
141