Printronix T5000 Software Manual page 22

Chapter 1
Getting Started
11. Click OK. The Printer Properties dialog box closes and you return to the
printer database main window. See Figure 6. Your printer is now set up in
the PNE database.
12. Try to access the virtual operator panel as a test to see if the information
you input is accurate. Follow this procedure:
a. Tutorial (My First Connection) should be highlighted in blue, as
b. Select Applications Operator Panel. The virtual operator panel
22
Figure 6. Printer Database Main Window
shown in Figure 6. If it is not highlighted, click it to select it.
appears (see "Operator Panel" on page 104). If not, an error
message appears in the Status and Error Log pane. Check your
password to make sure it is correct. If the error continues, contact
your system administrator.