Leap Tab - Printronix T5000 Software Manual

Chapter 4
Set Wireless Properties

LEAP Tab

IMPORTANT
To use LEAP, you must set Authentication to LEAP in the General tab
(page 127).
This tab displays the information necessary for the Cisco
Extensible Authentication Protocol) wireless security scheme. The Cisco
LEAP allows for a WEP key timeout that forces re-authentication, resulting in
the derivation of a new WEP key for the session.
Enter the User Name, Password, and Confirm Password corresponding to the
RADIUS (Remote Authentication Dial-In User Service) server, then click
Confirm to confirm the Password.
To enable LEAP in the NIC, select the General tab. Make sure LEAP is
selected in the Authentication drop down menu. Click Send to transmit the
LEAP settings and the wireless properties defined in the General tab.
134
Figure 112. Wireless Properties: LEAP Tab
®
LEAP (Lightweight