Printronix T5000 Software Manual page 14

Chapter 1
Printer Setup
5. If you have the internal PCI NIC, press + until Ethernet (or Debug
Ethernet) displays. If you have the external NIC, press + until Adapter (or
Debug Adapter) displays.
6. Press
7. Press ↓ and
8. Press PAUSE twice to put the printer back online.
SL5000e/T5000e Series Thermal Printers
1. On the operator panel, press the PAUSE key to take the printer offline.
2. Press ↓ and
3. Press +, –, ↓, and ↑ at the same time to enter the Factory menu.
4. Press ↓ until Diagnostic Port displays.
5. Press + until Debug Ethernet displays.
6. Press
7. Press ↓ and
8. Press PAUSE twice to put the printer back online.
SL4M/T4M Series Thermal Printers
1. Press
2. Press the Down and
3. Press the Right key until
4. Press
5. Press the Up key until Admin User displays.
6. Press the Right key until Enable displays.
7. Press
8. Press
9. Press the Down key until
10. Press
11. Press the Down key until Printer Mgmt displays.
12. Press
13. Press the Down key until PNE Port displays.
14. Press the Right key until Ethernet displays.
15. Press
16. Press the Down and
17. Press
14
↵
to select it.
↵
at the same time to lock the
↵
at the same time to unlock the
↵
to select it.
↵
at the same time to lock the
to enter Menu mode.
↵
keys at the same time to unlock the
PRINTER SETUP displays.
↵
to enter the PRINTER SETUP menu.
↵
to select it. An asterisk (*) displays after Enable.
to enter Menu mode.
INTERFACES displays.
↵
to enter the INTERFACES menu.
↵
to enter the Printer Mgmt menu.
↵
to select it. An asterisk (*) displays after Ethernet.
↵
keys at the same time to lock the
twice to put the printer back online.
↵
key.
↵
key.
↵
key.
↵
MEDIA SETUP displays.
↵
key.
key.