Printronix T5000 Software Manual page 219

•
RFID: Program Next Label
This action is specifically designed for RFID Print and Apply applications
where the programming of the RFID tag in the label does not have to
occur simultaneously with the printing of the actual text on the label.
•
Sensor Action
This action turns the media sensor on or off. See Figure 186.
Figure 186. Setting Sensor Action Parameters
•
Lock Operator Panel / Unlock Operator Panel
Once executed, the operator panel will be locked or unlocked. When
locked, the operator panel can still be accessed through the virtual
operator panel of PNE. If the Disable Event Parser has been executed,
the operator panel will be unlocked.
•
Key Handling
This action allows the user to specify how the actual Key Event should be
handled. Selecting Consume results in the original key function not being
executed (it is consumed by GPIO).
•
Beep and Blink
These actions allow the beeper to beep a specified number of times. The
Online lamp on the printer switches on, off or blinks at the normal printer
controlled rate.
•
Enable GPIO Events/Disable GPIO Events
These actions allow you to switch on or off the event parsing of GPIO.
When disabled, the only action GPIO will execute is the enable event
parser action.
Events And Actions
219