Creating Reports - Printronix T5000 Software Manual

Chapter 6
Reports

Creating Reports

We want to generate two reports using the sections just created. One report
to generate during printing and the other to generate after printing is
complete.
The first report, Label Count, is created with two sections: Header While
Printing and Forms Count. This will give the following text on the LCD:
# of Labels xxxx, where xxxx is the remaining label count.
The second report, Label Printing Done, is created with three sections:
Header When Done Printing, Forms Count, and End. This will give the
following text on the LCD: ALL DONE [xxxx] where xxxx is the remaining label
count.
1. Click the Report tab.
2. Type Label Count in the Name field.
3. Click the Header While Printing section under Available.
4. Click the < button to add the Header section.
5. Click the Label section under Available.
6. Click the < button to add the Label Count section.
7. Click the Add button. Label Count is added to the item list (Figure 204).
234
Figure 204. Adding Available Sections