Printronix T5000 Software Manual page 213

Actions
The Action field allows you to specify which action should be linked (or
mapped) to the selected event. Table 10 lists all possible actions and related
parameters.
Action Name
Output Opto-Coupler
Output Relay
Printer Status
Printer Online
Printer Offline
On/Offline Switch
Data Control
Clear Buffer
Engine Control
1
Pause Printing
1
Start Printing
1
Print Next Label
2
Reprint Next Page
Table 10. Event Actions and Parameters
Description
Action that applies to the output
Opto-Couplers.
Action that applies to the output
relays.
Action switches the printer to
online mode.
Action switches the printer to
offline mode.
Action toggles the printer between
offline and online mode.
Action clears all of the printer's
internal buffers. Data stored in
flash (e.g. form templates) are not
cleared.
Action pauses printing after the
current label is printed. Labels in
the queue will stop printing until
the start printing action is received.
Action resumes printing if printing
was stopped with the pause
printing action.
Action starts printing the next label
in the queue if printing in single
label printing mode.
Action starts printing the next page
in the queue if printing in single
page printing mode.
Events And Actions
Parameters
State, Pulse, Repeated
Pulse, Number (1..8),
Pulse Duration (ms)
Action, State, Pulse,
Repeated Pulse,
Number (1..4)
None
None
None
None
None
None
None
None
Security Key
Required
213