Printronix T5000 Software Manual page 49

3. Syslog Posting: Used in a UNIX operating system, it allows PNE to log
alerts to a file located in the PNE installation directory. To log alerts,
check the Enable Syslog check box, then click Add (see Figure 33). A
task item adds to the log list. In the task item, specify the following as
applicable, then click Apply or OK.
Machine Address: The UNIX IP Address.
Port: See your system administrator.
Device: To choose a device item that you want PNE to monitor, such
as a folder, specific printer, or a range of IP addresses.
First: To set the beginning IP address in a polling range. Use this
option if you select Range: as the Device option.
Last: To set the last IP address in a polling range. Use this option if
you select Range: as the Device option.
NOTE: In the remaining alert option fields, select enable or disable as
desired.
Offline, Warning, Media Input, Media Output, Media Path, Marker,
Cutter, Barcode, RFID, Scanner, Label, Intervention Needed,
Consumables, and Power Cart: For a description of the alert groups
and printer events, refer to "Alert Groups" in the SNMP Configuration
section of chapter three in the Network Interface Card User's Manual.
All options are enabled by default.
Comment: Enter comments as needed.
The Status Menu
49