Printronix T5000 Software Manual page 150

Chapter 5
CST Manager
9. In PNE, select Applications Operator Panel.
10. Take the printer offline.
11. Select PRINTER CONTROL Applic. Adapter if you have a thermal
printer, or select MAINT / MISC Applic. Adapter if you have a laser or
line matrix printer.
12. Change the setting from Disable to the name of the CST you downloaded
(such as CST-1, CST-2, etc.). Your CST is now enabled.
NOTE: To maximize the performance of a CST, you need to save it in a
Validate Bundle
Checks CSTs for syntax errors and missing information such as "Start Flush"
commands that have no corresponding "End Flush" command. Errors display
in red. Warnings display in yellow.
You cannot execute CSTs with errors, but you can execute CSTs with
warnings.
Options
Specifies options that apply to the CST. Includes the following check boxes:
• Use Last Selected Upload Printer
• Use Last Selected Download Printer
150
Configuration file. See "Configuration Editor" on page 69.