Set Password - Printronix T5000 Software Manual

Set Password

Laser Printers (L5535, L5520, L1524)
1. On the operator panel, press the ONLINE key to take the printer offline.
2. Press UP and DOWN at the same time to unlock the ENTER key.
3. Press UP, DOWN, PREV, and NEXT at the same time to enter the
Factory menu.
4. Press NEXT until PRINTER MGMT displays.
5. Press DOWN until Diagnostic Port displays.
6. Press DOWN again to see the current selection.
7. Press NEXT until Debug Ethernet displays.
8. Press ENTER to select it.
9. Press UP and DOWN at the same time to lock the ENTER key.
10. Press ONLINE to put the printer back online.
Set Password
See "Set Printer Password" on page 125 to learn how to set passwords.
If the password is unknown you must clear it first.
P7000 Series
Go into the Factory menu (press , , , and at the same time), then into
the PRINTER MGMT menu. Press until Clear Password displays.
Unlock the ENTER key, then press ENTER to clear the User and Supervisor
passwords.
Under the Security tab in Printer Properties, delete any passwords that
already exist. Now you may set new passwords as described on page 125.
SL5000/T5000 Series
Go into the Factory menu (press +, –, ↓, and ↑ at the same time). Press ↑ or ↓
↵ ↵
until Clear Password displays. Unlock the key, then press to clear the
User and Supervisor passwords.
Under the Security tab in Printer Properties, delete any passwords that
already exist. Now you may set new passwords as described on page 125.
SL4M/T4M Series
Go into the Factory menu (press the Up, Down, Left, and Right keys at the
↵
same time). Press ↑ or ↓ until Clear Password displays. Unlock the
key, then
↵
press to clear the User and Supervisor passwords.
Under the Security tab in Printer Properties, delete any passwords that
already exist. Now you may set new passwords as described on page 125.
All Other Printers
Go into the Factory menu, then into the PRINTER MGMT menu.
Press NEXT until Clear Password displays. Unlock the ENTER key, then
press ENTER to clear the User and Supervisor passwords.
Under the Security tab in Printer Properties, delete any passwords that
already exist. Now you may set new passwords as described on page 125.
15