Printronix T5000 Software Manual page 48

Chapter 2
The Menu Bar
Next, click Add to define a new task (see Figure 32). In the new task item,
specify the following information, then click Apply or OK.
NOTE: In the remaining alert option fields, select enable or disable as
48
Email Address: Enter the e-mail address where you want PNE to
send the alert messages.
Device: To choose a device item you want PNE to monitor, such as a
folder, specific printer, or a range of IP addresses.
First: To set the beginning IP address in a polling range. Use this
option if you select Range: as the Device option.
Last: To set the last IP address in a polling range. Use this option if
you select Range: as the Device option.
desired.
Offline, Warning, Media Input, Media Output, Media Path, Marker,
Cutter, Barcode, RFID, Scanner, Label, Intervention Needed,
Consumables, and Power Cart: For a description of the alert groups
and printer events, refer to "Alert Groups" in the SNMP Configuration
section of chapter three in the Network Interface Card User's Manual.
All options are enabled by default.
Comment: Enter comments as needed.
Figure 33. Status Monitoring Properties:
Alert Delivery Tab – Syslog Posting Sub-Tab