The Entry Fields - Printronix T5000 Software Manual

The Entry Fields

Figure 176. The Event To Action Mapping Fields
Setting the criteria for mapping tables takes place in the Event to Action
Mapping section (see Figure 176). The Description field allows you can enter
a descriptive name to indicate the use of the event and its related action.
NOTE: The window header indicates which printer type (thermal or line
matrix) the mapping table is created for. Figure 176 indicates a
Thermal printer.
The Event and Action fields allow you to select an event and apply an action
to the selected event. Table 9 on page 204 lists the events currently available
in the software.
The Parameters button allows you to select additional conditions related to
the event (Figure 177).
Figure 177. Setting Event Parameters
The action field allows you to select the action that is to be taken on the
specified event. Table 10 on page 213 lists the actions currently available in
the software.
The parameter button allows you to select additional conditions related to the
action. Figure 178 displays parameters for the Output Opto-coupler and
Output Relay actions.
The Entry Fields
203