Cs 1000 Configuration; Cs 1000 Configuration Procedures; Checking The System Status; Checking The Current Ip Address Of The Cs 1000 (Ld 117) - Nortel CallPilot Supplementary Manual

CS 1000 configuration
CS 1000 configuration procedures
CallPilot can be provided only on a per customer basis on the
Communication Server 1000 (CS 1000) system. AML messages used for
communications between the CS 1000 system and CallPilot contain a
customer number to which CallPilot belongs.
In these procedures, ensure that you enter the correct customer number
in the overlays.
The sequence of CS 1000 configuration procedures is as follows:
•
•
•

Checking the system status

The sequence of procedures in this section is as follows:
•
•
•
•
•
•

Checking the current IP address of the CS 1000 (LD 117)

Perform the following procedure to check the current IP address and routes
in the CS 1000.
Solution Integration Guide for Communication Server 1000/CallPilot/Contact Center/Telephony Manager
Copyright © 2006, Nortel Networks
.
"Checking the system status" (page 21)
"Configuring CallPilot resources on the CS 1000" (page 25)
"Configuring Contact Center resources on the CS 1000" (page 49)
"Checking the current IP address of the CS 1000 (LD 117)" (page 21)
"Defining a default Gateway (LD 117)" (page 22)
"Checking the Ethernet Interface status of the CS 1000 (LD 137)" (page
23)
"Enabling the Ethernet interface on the CS 1000 (LD 137)" (page 23)
"Checking the ELAN status on the CS 1000 (LD 48)" (page 24)
"Enabling the ELAN on the CS 1000 (LD 48)" (page 24)
Enterprise: Common
NN49000-300 01.01 Standard
CS 1000 Release 4.5 20 December 2006
21
Nortel Networks Confidential