Configuring Dscp Rewrite - D-Link Web Smart DES-3252P Install Manual

Configuring DSCP Rewrite

The DSCP Rewrite Page allows network managers to assign new DSCP values to incoming packets. To enable
DSCP Rewrite:
1. Click Basic Setup > Quality of Service > Basic Mode > DSCP Rewrite. The DSCP Rewrite Page opens:
Figure 130:DSCP Rewrite Page
The DSCP Rewrite Page contains the following fields:
•
DSCP In — Displays the incoming packet's DSCP value.
•
DSCP Out— Displays the outgoing packets's DSCP value.
2. Define the DSCP In Queue field.
3. Click . The DSCP values is reassigned, and the device is updated.
Page 197
Configuring Quality of Service
Configuring Basic Mode