Configuring Network Security - D-Link Web Smart DES-3252P Install Manual

Configuring Network Security

Network security manages both access control lists and locked ports. This section contains the following topics:
•
Network Security Overview
•
Defining Network Authentication Properties
•
Defining Port Authentication
•
Configuring Traffic Control
Network Security Overview
This section provides an overview of network security and contains the following topics:
•
Port-Based Authentication
•
Advanced Port-Based Authentication
The Security Suite Authentication Properties Page allows network managers to configure network authentication
parameters. In addition, Guest VLANs are enabled from the Security Suite Authentication Properties Page. To
define the network authentication properties:
1. Click Advanced Setup > Security Suite > Authentication > Properties. The Security Suite Authentication
Properties Page opens.
Figure 80: Security Suite Authentication Properties Page
The Security Suite Authentication Properties Page contains the following fields:
•
Port-Based Authentication State — Indicates if Port Authentication is enabled on the device. The possible
field values are:
–
Enable — Enables port-based authentication on the device.
–
Disable — Disables port-based authentication on the device.
Page 134
Configuring Device Security
Configuring Network Security